PA Sketch Rhino Connector 0.3.11 — Mac
Prompt Architects · Developed by PA_Lap
https://www.paarchi.com/pa-sketch/ko-rhino.html
https://www.paarchi.com/pa-sketch/en-rhino.html

한국어
준비: Rhino 8.21 이상 for Mac(최신 Rhino 8 권장), iPadOS 17 이상 PA Sketch, 같은 신뢰할 수 있는 로컬 네트워크. Mac은 유선 LAN, iPad는 같은 라우터의 Wi-Fi여도 됩니다. USB 연결은 필요 없습니다. Mac용 PA Sketch 별도 설치도 필요 없습니다. Windows, Rhino 7, iRhino 3D용 모듈이 아닙니다. Apple silicon Mac의 Rhino 8.36에서 확인하며 다른 버전/Intel은 별도 검증 대상입니다.

1. Mac에서 기존 Rhino 작업을 저장하고 Rhino를 완전히 종료하세요.
2. PA-Sketch-Rhino-0.3.11-Mac.macrhi를 더블클릭하세요. Rhino 설치 안내를 마친 뒤 Rhino를 종료하고 다시 여세요.
3. Rhino에서 작업 파일을 여세요. 새 테스트 파일은 Millimeters(mm)를 권장합니다. 기존 모델은 단위 이름만 바꾸지 마세요.
4. Rhino 명령창에 PASketchConnect를 입력하고 Enter를 누르세요.
5. iPad PA Sketch → Rhino Pen → 연결 아이콘 또는 Open Rhino Connection → Pair with QR. 요청되는 Camera와 Local Network 권한을 허용하고 Mac QR을 스캔하세요.
6. 등록 QR은 5분·1회용입니다. 등록이 끝날 때까지 Mac 연결 창을 열어 두세요. 만료되면 New QR을 누르세요.
7. 파일 확인이 나오면 작업할 Rhino 파일 이름을 확인하고 Draw in This File을 누르세요. Paper에서 Sketch Curve(새 버전은 Model Curve)로 짧은 선을 그려 양쪽에 나타나는지 확인하세요. Sketch Ink는 자유 스케치용이며 Rhino 모델 커브 전송과 다릅니다.
8. 다음부터 Rhino와 PA Sketch를 켜고 같은 네트워크에 있으면 저장한 등록으로 재연결합니다. 새 파일로 바꾸면 대상 파일 확인이 다시 나올 수 있습니다.

카메라 없이 등록: Mac 연결 창에서 Copy Pairing Link를 누르고 iPad 연결 창의 Paste를 누르세요. Mac과 iPad의 공통 클립보드는 같은 Apple 계정의 Handoff와 Wi-Fi/Bluetooth가 필요합니다. 공통 클립보드가 없으면 본인 iPad로만 텍스트 파일을 AirDrop해 내용을 복사하세요. 링크는 인증 정보이므로 웹사이트·공개 게시판·지원 문의에 보내지 마세요. 5분 안에 등록하고 Mac 창을 닫지 마세요. Copy Pairing Link는 기존 QR을 새로 발급하므로 이전 QR은 만료됩니다.

수동 설치: ZIP을 풀고 PASketchRhino.rhp 폴더 전체를 Finder → 이동 → 폴더로 이동 → ~/Library/Application Support/McNeel/Rhinoceros/8.0/MacPlugIns/ 에 넣은 뒤 Rhino를 다시 여세요. 폴더 내부의 동명 파일 하나만 옮기지 마세요. 같은 플러그인을 공통 MacPlugIns 폴더와 8.0 폴더에 중복 설치하지 마세요. 기존 버전은 Rhino 종료 후 별도 백업 폴더로 옮긴 뒤 교체합니다.

문제 해결: Unknown command는 설치 후 Rhino 재시작/버전/폴더 위치를 확인하세요. 기기가 안 보이면 Local Network 권한, 같은 네트워크, 게스트 Wi-Fi 기기 격리, Mac 방화벽의 Rhino 허용을 확인하세요. 인터넷 공유기의 포트를 열 필요는 없습니다. 카메라가 검으면 QR 창을 닫고 기본 카메라를 확인하세요. 기본 카메라도 검으면 두 앱을 종료 후 다시 켜고, 계속 같으면 iPad를 재시동하거나 Apple 지원에 문의하세요. PA Sketch만 계속 검으면 지원팀에 기기·OS·앱 버전을 알려 주세요.

제거: Rhino를 종료하고 설치 위치의 PASketchRhino.rhp만 제거하세요. 기기 등록 취소는 PASketchConnect 창의 Forget, iPad의 Forget Connection을 사용합니다. Rhino 모델과 PA Sketch 프로젝트는 별도로 저장·보존하세요.

English
Requirements: Rhino 8.21+ for Mac (latest Rhino 8 recommended), PA Sketch on iPadOS 17+, and a trusted local network shared by both devices. Ethernet on the Mac and Wi-Fi on the same router is fine. No USB cable or separate Mac PA Sketch app is needed. This download is not for Windows, Rhino 7 or iRhino 3D. Verification target: Rhino 8.36 on Apple silicon; other versions and Intel require separate validation.

1. Save your Rhino documents and quit Rhino.
2. Double-click PA-Sketch-Rhino-0.3.11-Mac.macrhi. Complete Rhino's installation prompt, then quit and restart Rhino.
3. Open your model. Use Millimeters for a new test file; do not relabel units on an existing model without scaling correctly.
4. Enter PASketchConnect in Rhino's command line.
5. On iPad: PA Sketch → Rhino Pen → connection icon / Open Rhino Connection → Pair with QR. Allow Camera and Local Network access when prompted. Scan the Mac's QR.
6. Keep the Mac pairing window open. The invitation is valid for five minutes and one iPad. Use New QR if expired.
7. Confirm the target document with Draw in This File when prompted. In Paper, draw a short Sketch Curve (Model Curve in newer versions) and check it appears in Rhino. Sketch Ink is for freehand ink, not CAD curve transfer.
8. Paired devices reconnect using the saved registration. A different Rhino document may ask for confirmation again.

Without a camera: use Copy Pairing Link in Rhino, then Paste in the iPad connection panel. Universal Clipboard requires the same Apple Account, Handoff, Wi-Fi and Bluetooth. Alternatively, AirDrop a text file only to your own iPad and copy the link there. Register within five minutes and keep the Mac window open. Copy Pairing Link issues a fresh invitation and invalidates the previous QR. Treat the link as a credential: never publish it or send it to support.

Manual install: unzip the ZIP and move the entire PASketchRhino.rhp folder to ~/Library/Application Support/McNeel/Rhinoceros/8.0/MacPlugIns/ using Finder → Go → Go to Folder. Create MacPlugIns if absent. Do not install duplicate copies in the common and version-specific MacPlugIns folders. Quit Rhino and move the old plugin to a separate backup folder before replacing it.

Troubleshooting: Unknown command → restart Rhino and check version/folder. Discovery failure → Local Network permission, same LAN, guest-network device isolation, and Rhino firewall permission. No router port forwarding is required. Black QR camera → close the scanner and test Apple's Camera. If both are black, close both apps and reopen; if needed restart iPad or contact Apple. If only PA Sketch fails, report device/OS/app versions to support.

Uninstall: quit Rhino and remove only PASketchRhino.rhp from its install location. Revoke an iPad with Forget in PASketchConnect and Forget Connection on iPad. Keep model/project backups.

Notices
This is a managed Rhino plug-in, not a standalone Mac app. It is distributed through Rhino's .macrhi installer format, not an Apple-notarized app installer. Do not disable macOS security protections. If blocked, use the manual installation guide or contact support.
No account credentials, pairing tokens, certificates, private project files, Rhino SDK binaries or debug symbols are included. QRCoder 1.8.0 is distributed under the included MIT license. Rhino is a trademark of Robert McNeel & Associates. No affiliation, certification or endorsement is claimed. SHA256SUMS.txt on the download page verifies the archives.
